Back to previous page
MSP Oneseal overschilderbare beglazingskit

MSP-Oneseal®

MSP-Oneseal is a polymer based, elastic sealant for glazing and connection joints. MSP-Oneseal is paintable with solvents and water based paints. It meets ISO11600G and KOMO acc. to BRL2801 certificates 33023 and 33024.
Add to wishlist

Characteristics

    • Does not contain isocyanates, solvents or silicones
    • Excellent paintability with most common paints
    • Long lasting elasticity
    • Good processing
    • No strong odour
    • Large bonding spectrum

Applications

    • For connection joints where painting afterwards is required
    • Topseal and heel beads for glazing in general, double glazing and laminated safety glass (VSG)

Specifications

    • ISO11600 20HM as a Classified Glazing Sealant
    • CE Marking, EN15651-1-2012: F Ext-Int. CC
    • CE Marking, EN15651-2-2012: G CC
    • NPR3577, Dutch Glazing Directive
    • EN5096, SHR Report on Burglary Resilience
    • KOMO Certificate 33023/33024 acc. BRL2801/2803
    • Indoor Air Comfort GOLD, Emicode EC1-Plus, Belgian and
      French VOC Regulation, BREEAM, Blue Angel, LEED v4
      EMICODE EC1-Plus

Technical data at 23 ºC and 60 %RV

Handling temperature: +5 ºC to 40 ºC
Resistance to temperature: -40 ºC to 90 ºC
Tooling time: 30 min.
Curing /24h /48h: ≥ 2.0 / ≥ 3.0 mm
Hardness (DIN 53505): ±30º Shore-A
Movement capability: 25%
E-Modulus 100%, DIN53504S2*: 0,75 N/mm²
Tensile strength, DIN53504S2*: 1,0 N/mm2
Elongation at break, DIN53504S2*: ± 200%
Consistency (DIN EN 27390): non sagg
Volume change, ISO10563: < 3%
Organic solvent: 0.00 (VOC/EEC)
*This data are based on measurements after 7 days, 23 °C and 50 %RH

Chemical resistance

  • Strong against water, salt water, aliphatic solvents, oils, grease, diluted inorganic acids and alkalis.
  • Moderate against esters, ketone and aromatics.
  • Not resistant against concentrated acids and chlorinated hydrocarbons.

Available standard colors (RAL approach)

  • White, RAL9010
  • Cream white, RAL9001
  • Grey, RAL7004
  • Anthracite grey, RAL7016
  • Brown, RAL8007
  • Black, RAL9011

Packing
Cartridges of 290 ml. Aluminium foils of 600 ml.

Handling
Extrude with a standard caulking gun or air-gun. Finish joints with a solution of BS Joint finisher in water using a sharp putty knife or rubber spatula. Fresh stains and tools are to be cleaned with Bloem MultiCleaner or PowerScrubs fibre-reinforced cleaning wipes. Cured sealant can only be removed mechanically. Hands can be cleaned best with Bloem Powerscrub wipes.

Storage and use
Store in a cool, dry space between +5°C and +25°C, in its original sealed packaging. For best results, use before 12 months after production.

 

 

Downloads

Certificate
Technical datasheet

Order

If you are interested in buying this product please feel free to Contact us