Technical data at 20 ºC and 60 % RH
| Processing temperature: |
+5 °C to 30 °C |
| Temperature resistance: |
-40 °C to 120 °C |
| Density: |
1,3 g/ml |
| Skin formation: |
25 to 30 min. |
| Shrinkage (ISO 510563): |
< 3% |
| Hardness (DIN53505) |
± 45 Shore-A |
| Curing speed 24 hours/ 4 days: |
3 mm / 6 mm |
| Flow (ISO 7390): |
Nil |
| E-modulus, 100% (DIN53504): |
1,1 N/mm² |
| Tensile strength (DIN53504): |
1,377 N/mm² |
| Elongation at break: |
174% |
| Movement capability: |
7,5% |
Installing
-
- Ensure all sashes are coated according to regulations and are free from moisture, dirt and dust.
- Degrease surfaces with Bloem Cleaner and a clean cloth. Afterwards, do not touch the degreased parts. For unknown substrates (powder coatings), consult the Bloem Primer list or perform adhesion tests.
- Glass should be supported with plastic setting blocks according to national guidelines. If the glass panel is subject to wind load e.g. directly after installation, secure the panel until the sealant has vulcanised.
- Installing glass with a classic exterior stop means a full bedded system is used. Therefore the space around the panel should be filled without any air pockets. Condensation in air pockets,may lead to damage of insulation glass. We recommend to keep 5 mm space around the glass panel to fill the cavity properly. Glazing beads should be straightened with a spatula (PALU) or putty knife before skin formation.
Compatibility
Practice and laboratory tests have proven that Renoseal is compatible with most Insulation Glass primary seals. The HenkelTeroson report 210/2004 and other suppliers of IG-sealants confirmed this. For unknown insulation glass composites, please consult our TS.
How to use the product
Cut the nozzle to the width of the stop edge. Extrude sealant with hand or battery gun. Prior to skin formation finish the surface using a rubber spatula (PALU) and Bloem Joint-finisher. Tools and stains can be cleaned with Bloem Multi-cleaner. Cured sealant can only be removed mechanically.
Standard colours to RAL approach
-
- Cream white – RAL9001
- Grey- RAL7004
- Traffic white- RAL9016
- White- RAL9010
- Green- RAL6009
- Black- RAL9011
- Anthracite grey – RAL7016
- Other colours available from 75 tubes/300 foils.
Packing
310 ml cartridges and/or 600 ml foils
Shelf life
Store for 9 months in unopened packaging in a cool and dry place at temperatures between +5 °C to +25 °C
Safety measures
Keep product out of reach of children. In general, long-term skin contact should be avoided. Prevent contact with food and other consumption products until the sealant has vulcanised. After contact with eyes, flush with plenty of water and consult a doctor if necessary. When used for its intended purpose, the vulcanised product does not pose any risk. See Safety Data Sheet for additional info.
Order
If you are interested in buying this product please feel free to Contact us
