FernoTherm Coating

Fernotherm Coating is a fire-retardant coating that expands when exposed to fire. It is developed to enhance the fire resistance of fire seals by protecting electric cables, cable trays, and metal pipes. The coating protects the plastic sheath of the cable and, therefore, secures the power supply during a fire. Fernotherm coating insulates the cables during a fire, thereby increasing the overall fire resistance.
Add to wishlist

Properties

  • Prevents damage from fire and smoke
  • The intumescent coating expands slightly and has an endothermic effect in case of fire
  • Smoke, gas, and vapor-tight
  • Suitable without the use of a primer for materials such as cables with a PVC and rubber jacket, for steel and primed steel, for most non-porous materials such as concrete, brick, masonry, wood, and plaster
  • After applying a protective topcoat, Fernotherm coating can also be used for outdoor applications.
  • White in colour and permanently elastic
  • Does not affect cables and pipes
  • Formaldehyde and halogen-free
  • Resistant to aging
  • Environmentally friendly

Applications

  • Flexible walls
  • Rigid walls and floors
  • Cable trays
  • Uninsulated steel pipes up to Ø114mm
  • Cables and cable bundles up to Ø100mm
    *Classifications range from EI45 to EI120, for specific applications refer to the ETA.

Testing / certification

  • Tested according to NEN 6069 and EU standard EN 1366-3, ETA 22/0710
  • Certification according to EAD 350454-00-1104
  • Tested for air permeability according to EN1026 up to 600Pa
  • Indoor Air Comfort Gold, VOC A+ Regulation, BREEAM, BlueAngel, LEED v4.

Technical data

Product: Intumescent coating based on acrylic
Classification: Up to E240, EI240*
Curing system: Water evaporation
Health and safety: Not dangerous
Test Standards: International Electrotechnical Commission 30661, EuroNorm 1366
Classification: EN 13501-1, EU Regulation 216/363
Application temperature: 10°C to +30°C. / ≤ 80% RH
Temperature resistance: -30°C to +80°C
Skin formation time: 60 min @ 22°C / 50% RH
Reaction to fire: B-s1, d0
Thermal conductivity: 0.82/0.88 W/mK @ 20mm depth
VOC content: 0.0001 g/l
Functionality retention: 12 years for intended use
*For achieved fire resistance per application, see test report (ETA 22/0710 & 22/0711)

Colour
Matte white

Handling of the product
Apply with a roller, brush or airless spray. The open time is 20 minutes at 20ºC / 50% RH. Clean tools and fresh stains with water.

Packaging
Plastic buckets of 3 litres.

Storage and shelf life
Store in a cool and dry place (5°C < 25°C). Shelf life is at least 6 months in original packaging

Downloads

Technical datasheet

Order

If you are interested in buying this product please feel free to Contact us