Applications
- Designed for energy efficient buildings
- For sealing moving joints at windows and doors, roof openings and hollow spaces
- For sealing of partition walls and set areas
- For sealing tubes and (electrical)piping transits
Characteristics
- Adheres to wood, stone, concrete, masonry, metal and various synthetic materials, not on Polyethylene, silicone and greasy surfaces
- Gives a uniform fine cell structure
- Provides excellent insulation values
- Provides good thermal and sound insulation
- Free Foam Yield to 44 liters
- Rot free, moisture and temperature resistant
- Ageing resistant, not UV resistant
- Can be stored in vertical or horizontal position
Processing
Surfaces should be solid, clean and free from dust and grease. Floors should be covered in advance with paper or plastic foil. Moisten surfaces lightly with water in order to improve the adhesion and to accelerate curing time. Shake the canister vigorously 20x before use. Stand up the canister and attach the gun to the threaded ring of the can. Take care not to tip the canister or over tighten. Dose the foam by gentle pressure on the trigger. Fill cavities 80% as fresh foam expands during curing. During application, the canister has to be shaken regularly. For large gaps and cavities, moistening after each foam layer is recommended.
Packing
Canisters à 750 ml. 12 Canisters per box.
*For more information, please go to the 'Downloads' section and open the Technical data sheet.