Technical data at 23 °C and 50% RH
Processing temperature: |
+5 °C to +40 °C |
Temperature resistance: |
-10 °C to 80 °C |
Skin formation (ASTM C679): |
15 to 60 minutes |
Curing speed / 24 hours: |
40° Shore-A |
Hardness (DIN 53505): |
2 mm |
Density (ASTM D792): |
1,05 ± 0,03 g/ml |
Weight loss: |
Ca 30% |
Tensile strength: |
≥ 0,10 Mpa |
Max. tensile strength: |
≥ 0,30 Mpa |
E modulus 100% (DIN 52455) |
≥ 0,20 MPa |
Elongation at break (ISO 8339) |
≥ 400% |
ovement capability: |
12,5% |
|
|
Processing
Apply with standard hand, battery or air gun. Level and finish the sealant with a joint nail or moisturised spatula. If the sealant has not yet fully cured, tools and stains can be cleaned by means of water and a brush. Vulcanised sealant can only be removed mechanically.
Processing advice
Substrates should be clean and free from dust, grease, rust and loose particles. No primer is required for non-porous surfaces. On porous surfaces such as concrete, stone, cement and plaster a primer (mixture of one part acrylic sealant and 4-5 parts of water) can be applied. The Immediately after the application, smooth the sealant at once with wet finger or a wet tool. Excess sealant can be removed by a wet cloth. Keep the sealed joint dry at least for two hours.
Restrictions
- It must not be used in totally confined spaces where sealant cannot cure due to lack of atmospheric moisture.
- Should not be applied for sealing joints permanently exposed to water.
- It should not be applied in case of risk of rain or frost
Packaging
310ml cartridges, 600ml sausages
Colours
Standard white which becomes fully clear after curing.
Shelf life
Minstens 12 maanden in ongeopende verpakking droog bewaard bij temperaturen tussen 5ºC en 25ºC.
Safety measures
For at least 12 months in unopened packaging in a cool and dry storage at temperatures between 5°C < 25°C.
Order
If you are interested in buying this product please feel free to Contact us